NEW PRODUCTS
TAKACHI frequently launches new products and sizes, as well as various other news.
Please check it out from time to time!
- IP67 WEARABLE ENCLOSURE - SMW series
- Wearable enclosure with IP67 waterproof
- Stylish and easy-to-wear design suits any situation
- Suitable for detectors, GPS terminals, RFID devices and more
- Available in 2 sizes
- NEW PRODUCT
- IP68 DIECAST ALUMINIUM ENCLOSURE - DW series
- IP68 high performance diecast aluminium box
- EMC shielding is achieved by unfinished inner side
- as well as the conductive silicone gasket.
- Suitable for use as outdoor network device and more
- NEW PRODUCT
- IP68 HEATSINK DIECAST ALUMINIUM ENCLOSURE - DWH series
- IP68 and heat dissipation diecast aluminium box
- EMC shielding achieved by unfinished inside Top cover, Base,
- as well as the conductive silicone gasket
- Suitable for use in outdoor network device and more
- NEW PRODUCT
- IP68 WATERPROOF PC+ASA BOX - WGPC series
- IP68 high performance waterproof plastic enclosure.
- Protected from immersion 24 hours at 1m depth.
- PC/ASA material allows superior heat and flame resistance.
- Perfect for use as outdoor gateway & network devices.
- NEW PRODUCT
- IP68 WATERPROOF BOX - WG・WGPC series
- IP68 high performance waterproof plastic enclosure.
- Protected from immersion 24 hours at 1m depth.
- Made of UV-resistant ASA material.
- Perfect for use as outdoor gateway / network devices.
- NEW SIZE
- IP68 PLASTIC ENCLOSURE with VENTILATION PLUG - WGV series
- IP68 waterproof plastic enclosure with protective vent.
- Protected from immersion 24 hours at 1m depth.
- Made of UV-resistant ASA material.
- Perfect for use as outdoor gateway / network devices.
- NEW SIZE
- ECONOMICAL OUTDOOR NETWORK BOX - OB series
- Low price type outdoor network enclosure.
- Integrated pole mount bracket on the back side.
- Suitable for access point, IoT gateway, outdoor sensor.
- 3 sizes are available.
- NEW PRODUCT
- RACK MOUNT ENCLOSURE - YER series
- 19" rack mount enclosure
- Large internal effective area
- and reinforced structure
- Available in 2 colors and 9 sizes
- NEW SIZE
- RACK MOUNT ENCLOSURE with HANDLE - YERH series
- 19" rack-mount enclosure with handles
- Uses extruded aluminium on 4 sides
- Wide internal effective width of 424mm
- Available in 2 colors and 9 sizes
- NEW PRODUCT
- DIN RAIL MOUNT Raspberry Pi 5 HEATSINK CASE - RPHD series
- DIN Rail mount Raspberry Pi 5 heatsink case
- Equipped with highly efficient heat-sink top cover
- Diecast aluminium allows strength and rigidity
- Thermal conductive sheets included
- NEW PRODUCT
- IoT SMALL PLASTIC CASE - SIC series
- Rounded design small plastic enclosure.
- Easy assembly snap-in construction.
- Suitable for IoT devices, Sensor, RFID tag, Remote controller.
- 19 different sizes and White & Black colors are available.
- NEW SIZE
- WALL MOUNT IoT SMALL PLASTIC CASE - SIM series
- Rounded design small wallmount plastic enclosure.
- Easily attached to, or detached wall mounting bracket.
- Included easily attached/detached bracket.
- 14 different sizes are available.
- NEW SIZE
- DIN RAIL BOX - DRC series
- Plastic enclosure with mount bracket for 35mm DIN Rail.
- Toolless snap-in structure allows quick and easy assembly.
- Simple installation and removal with the pull lever.
- Suitable for network module, controller, data logger and others.
- NEW SIZE
- DIN RAIL MOUNTING BASE - DRP series
- Mounting base for enclosures and others onto 35mm DIN Rail.
- Easy mounting and dismounting using the pull lever.
- Replacement product for the discontinued DRA series.
- NEW SIZE
- IP65 DIECAST ALUMINIUM BOX - AL series
- IP65 and impact resistant diecast aluminium box
- Economical and selectable from 35 different sizes
- Available as BTO (built-to-order)
- Able to order from just 1 piece
- NEW PRODUCT
- Raspberry Pi 5 ACRYLIC CASE - RPA series
- Acrylic case for Raspberry Pi models.
- Single desktop, Dual desktop, and
- Single flanged models are available.
- New model available for Raspberry Pi 5.
- NEW PRODUCT
- Raspberry Pi 5 HEATSINK CASE with COOLING FAN - RPF-5
- Heatsink case with cooling fan for Raspberry Pi 5.
- Equipped with a highly efficient heat-sink top cover and
- thermal conductive sheets.
- *Raspberry Pi board is not included.
- NEW PRODUCT
- Raspberry Pi 5 ACTIVE COOLER - RP5-FAN
- Active cooler for standard Raspberry Pi 5 board.
- Excellent cooling effect while operating.
- Can be directly attached onto the board.
- Compatible with RPA-5 series.
- NEW PRODUCT
- Raspberry Pi 5 DIN RAIL CASE - RPDM-5
- DIN Rail mount case for use with Raspberry Pi 5.
- Easy assemble with flathead screw driver; no screws required.
- NEW PRODUCT
- DIN RAIL MOUNTING BRACKET - DRF series
- Mounting bracket for 35mm DIN Rail.
- Can be easily detached.
- Bulk packaging is available.
- Replacement product of CKD-80
- NEW PRODUCT
- ROCK 5A/4C+ ALUMINIUM CASE - ROCK-5A
- Aluminium case compatible with
- OKdo ROCK 5 Model A and ROCK 4 Model C+
- Knurled thumb screw allows easy hand assembly.
- ROCK single board is not included.
- NEW PRODUCT
- POLE MOUNTING BRACKET - PMB-1
- Small size pole mounting bracket
- Minimum applicable pole diameter Φ35
- Use SNB/PKB/SCT mounting belt together
- Installation screws (M3 size) sold separately
- NEW PRODUCT
- STAINLESS STEEL HOSE CLAMP - SNB series
- Screw adjustable type stainless steel hose clamp.
- Clamp band for hoses for air, liquid, and oil.
- Belt material : SUS304
- Wide lineup of 23 sizes from 8 mm to 308 mm.
- ALUMINIUM CONTROL BOX - AUH series
- Aluminium enclosure with opening/closing cover
- Selectable from 2 handle types : Normal and Key Lock type
- A large selection of 252 different sizes in 2 different colors
- Suitable for control panel, power supply and others.
- NEW PRODUCT
- 19” RACK MOUNT ENCLOSURE - AUR series
- 19” rack mount enclosure with insertion type front / rear panels
- A large selection of 35 different sizes in 4 different colors
- Suitable for use as audio/visual equipment,
- rack mount computers, measuring instruments and others.
- NEW PRODUCT
- 19” RACK MOUNT ENCLOSURE with DETACHABLE PANELS - AUPR series
- 19” rack mount enclosure with detachable panels
- The unfinished inner surface allows the case to be conductive
- A large selection of 28 different sizes in 2 different colors
- For audio/visual equipment, rack mount computers and others
- NEW PRODUCT
- EMC SHIELDED 19” ENCLOSURE with DETACHABLE PANELS - AUPRE series
- EMC shielded 19” enclosure with handles.
- Detachable front/rear panels allow for easy maintenance
- A large selection of 28 different sizes in 2 different colors.
- For audio/visual equipment, rack mount computers and others
- NEW PRODUCT
- 19” RACK MOUNT ENCLOSURE - AUXR series
- 19” Rack Mount Enclosure with 4 extruded aluminium frames
- Flat and rugged design rack mounting case with handles
- Selectable from 35 different sizes in 4 different colors
- For audio/visual equipment, rack mount computers and others
- NEW PRODUCT
- EMC SHIELDED 19” RACK MOUNT ENCLOSURE - AUXRE series
- EMC shielded 19” Rack Mount Enclosure with aluminium frames
- Flat and rugged design rack mounting case with handles
- A large selection of 35 different sizes in 2 different colors
- For audio/visual equipment, rack mount computers and others
- NEW PRODUCT
- PORTABLE ALUMINIUM INSTRUMENT CASE with HANDLE - AUGH series
- Rugged design aluminium enclosure with carrying handle
- Can withstand a maximum load of up to 20.0 kg
- 294 different sizes, 4 corner guard colors
- 2 handle colors, 2 enclosure colors
- NEW SIZE
- ALUMINIUM ENCLOSURE with CORNER GUARD - AUG series
- Rugged designed aluminium enclosure with corner guards.
- Corner guards also act as non-slip rubber feet.
- For measuring instrument, Network device, power supply.
- Available in 430 different sizes and 8 color types.
- NEW SIZE
- EMC SHIELDED RUGGED ENCLOSURE with CORNER GUARDS - AUGE series
- Rugged designed EMC shielded aluminium enclosure.
- Corner guards also act as non-slip rubber feet.
- For RF analyzer, network device, power supply, embedded PC.
- Available in 387 different sizes and 4 color types.
- NEW SIZE
- ALUMINIUM ENCLOSURE - AU series
- Simple and luxurious design universal aluminium enclosure.
- For measuring instrument, controller, power supply, amplifier
- Rubber feet / Aluminium feet can be selected.
- Available in 430 different sizes and 4 color types.
- NEW SIZE
- ALUMINIUM ENCLOSURE with DETACHABLE PANELS - AUP series
- Simple and luxurious design aluminium enclosure.
- Front / rear panel is easily detachable.
- Captive screws allow for ease of maintenance.
- Available in 387 different sizes and 2 color types.
- NEW SIZE
- EMC SHIELDED ENCLOSURE with DETACHABLE PANELS - AUPE series
- EMC shielding aluminium enclosure.
- Front / rear panel is easily detachable.
- Captive screws allow for ease of maintenance.
- Available in 387 different sizes and 2 color types.
- NEW SIZE
- ALUMINIUM CONTROL BOX - AUX series
- Round-edge designed aluminium enclosure.
- For industrial control box, command panel, audio amplifier.
- Rubber feet / Aluminium feet can be selected.
- Available in 270 different sizes and 4 color types.
- NEW SIZE
- EMC SHIELDED ALUMINIUM CONTROL BOX - AUXE series
- EMC shielding aluminium enclosure.
- Rugged design with a corner guard.
- For network device, embedded PC, industrial control box.
- Available in 270 different sizes and 2 color types.
- NEW SIZE
- WATERPROOF PROTECTOR CASE - NK-T series
- Robust and stylish waterproof carrying case.
- Large carrying handle for easy transportation and outdoor use.
- Top loading design allows vertical storage of tall items.
- Protection class : IP65
- NEW PRODUCT
- TRAY・DIVIDER SET for NK-T - NKTD series
- A set of tray and divider for NK-T
- The handle can be fitted on the tray.
- The handle can be removed when not in use.
- Easy organization with tray and divider.
- NEW PRODUCT
- SLEEVE CORE FERRITE CLAMP - NFT series
- One-touch split sleeve core ferrite clamp to reduce noise.
- Affordably priced yet being environmentally friendly.
- Casing is made using halogen-free PA66 (UL94V-0) material.
- 4 different sizes available.
- NEW SIZE
- SLEEVE CORE FERRITE CLAMP - NFT-20-20DK
- Ferrite clamp cable holder
- Can be fixed in place with
- optional accessory (NFTF-20-M4)
- NEW PRODUCT
- FITTING for NFT-20-20DK - NFTF-20-M4
- Fitting for NFT-20-20DK
- One-touch installation
- Can be fixed with M4 screws
- NEW PRODUCT
- ONE TOUCH SPLIT FLAT CLAMP FERRITE CORE for FLAT CABLES - SFCC-20
- Noise reduction sleeve core
- Structured so that it is less likely to
- clamp the flat cable when the resin
- case is closed
- NEW PRODUCT
- IP68 HINGED TERMINAL BLOCK JUNCTION BOX - JW series
- IP68 hinged terminal juction box allows easy access for
- maintenance or replacement of components.
- 2, 3 and 4 way types are available.
- 4P pole models and no terminal models are available.
- NEW PRODUCT
- IP68 POLYCARBONATE HINGED ENCLOSURE - UPC series
- IP68 high performance polycarbonate box withstand
- submersion to a depth of 2 meters for up to 24 hours.
- Perfect for use as outdoor communication network devices,
- solar power junction box, or FA controller.
- NEW SIZE