IP65 HINGED PLASTIC ENCLOSURES・POLYCARBONATE ENCLOSURES・NEMA ENCLOSURE
IP65 HINGED PLASTIC ENCLOSURES・POLYCARBONATE ENCLOSURES・NEMA ENCLOSURE -PDFCATEGORY: LATCH/HINGED PLASTIC BOX・WATERPROOF PLASTIC ENCLOSURE WITH DOOR・ABS PLASTIC ENCLOSURE・POLYCARBONATE BOX
Latch/hinged plastic boxes for easy open/close action.
Suitable for installing network devices, circuit breakers, IOT sensors and control units.
Suitable to be used as solar power junction boxes, outdoor WiFi access points, outdoor measuring equipment.

- IP68 POLYCARBONATE HINGED ENCLOSURE - UPC series
- IP68 high performance polycarbonate box withstand
- submersion to a depth of 2 meters for up to 24 hours.
- Perfect for use as outdoor communication network devices,
- solar power junction box, or FA controller.
- NEW SIZE

- IP65 LATCH-HINGED ABS PLASTIC BOX - BCAP series
- IP65 waterproof latch/hinged plastic enclosure.
- ABS plastic - Low cost type.
- White gray cover and Transparent cover are available.
- 50 different sizes are available.

- IP65 LATCH-HINGED POLYCARBONATE BOX - BCPC series
- IP65 waterproof hinged polycarbonate enclosure.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃~+75℃
- 50 different sizes available.

- IP65 POLYCARBONATE BOX with KEY LOCK - BCPK series
- IP65 hinged polycarbonate enclosure with key lock.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃~+75℃
- 50 different sizes available.

- IP65 PLASTIC BOX with OUTDOOR ROOF - BCAR series
- Waterproof hinged plastic enclosure with roof for outdoor use.
- Protection class: IP65
- White gray cover and Transparent cover are available.
- 44 different sizes available.

- IP65 POLYCARBONATE BOX with OUTDOOR ROOF - BCPR series
- Waterproof hinged polycarbonate box with roof for outdoor.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃~+75℃
- 45 different sizes available.

- NEMA 4X POLYCARBONATE BOX - BC-C series
- UL certified NEMA 4X latch-hinged box
- 49 different sizes and 2 different cover types
- Polycarbonate allows good heat resistant
- *UL certified products are built to order
- NEW PRODUCT

- OUTDOOR ROOF for HINGED PLASTIC BOX
- Rain protection roof for BCAP・BCPC・BCPK series.
- Snap-in easy installation.

- POLE MOUNT BRACKET for HINGED PLASTIC BOX
- Pole bracket for BCAP・BCPC・BCPK・BCAR・BCPR series.
- Can be attached to hinged plastic boxes without hole milling.
- Use optional mounting belt to install onto a pole. (PKB series)

- POLE MOUNTING BRACKET - WGMB-2SW
- Pole mount bracket made from robust diecast aluminium.
- Bracket can be mounted on both vertically, and horizontally.
- Sealing washers enables the installation to have a protection
- class equivalent to IPX7, X5.
- NEW PRODUCT

- STAINLESS STEEL TIES for POLE MOUNTING - SCT series
- Corrosion resistant stainless steel cable tie.
- Can be used to bundle cables or mounting enclosures to poles.
- Self-locking bracket allows easy mounting / cable bundling.
- For firm tightening, Use of Tighten gun G3388 is recommended.
- NEW PRODUCT

- TIGHTEN GUN for STAINLESS STEEL TIE
- Tool for cutting and tightening stainless steel strap.
- *Be careful of the sharp cut-edge of strap.
- Note: this product is not subject to RoHS regulations.
- NEW PRODUCT

- POLE MOUNTING BELT - SNB series
- Screw adjustable type stainless steel pole mounting belt.
- Belt material : SUS304
- Wide lineup of 18 sizes from 52 mm to 308 mm.
- Use with mounting bracket SSK・WGMB・WPMB series
- NEW PRODUCT

- POLE MOUNTING BELT- PKB series
- Universal pole mounting belt for outdoor enclosures.
- Stainless steel type and plastic type are available.
- Use SSK mounting bracket for installation onto a pole.

- WATERPROOF PROTECTOR CASE - NK series
- Durable and stylish waterproof protector case.
- Impact resistant yet lightweight reinforced resin body.
- Suitable for storing delicate electronics devices in the outdoors.
- 22 different sizes, smaller 19 sizes with or without interior foam.
- NEW SIZE

- IP68 WATER PROTECTION CABLE GLAND - AG series
- High water protection IP68 cable gland.
- Tough and heat resistant PA6FG material. (-20°C to +100°C)
- Wide selection for M8 ~ M50 thread
- Selectable in 15 sizes. (Φ2.5mm ~ Φ42 mm cable.)

- POLYAMIDE CABLE GLAND - RM series
- Low cost cable glands made from polyamide material.
- Wide selection, for M8 ~ M63 and Φ1mm ~ Φ44 mm cable.
- Protection class : IP67
- High oil resistant NBR rubber sealing and O-ring.

- WEATHERPROOF CABLE GLAND - RMW series
- Weatherproof cable glands for long-term outdoor use.
- High degradation resistant silicone sealing insert and O-ring.
- Protection class : IP67
- Thread size M8 ~ M50, Cable range Φ1mm ~ Φ38 mm.

- IP67 SPLIT INSERT CABLE GLAND - RSC series
- Waterproof split insert cable gland.
- Sealing insert can protect cables with connector.
- Selectable from M25 and M32 thread size.
- IP67 (In-house test) protection class.
- NEW PRODUCT

- MULTI-HOLE CABLE GLAND - RMH series
- Multi-hole cable gland with M type threads
- Up to a maximum of 6 cables can be used with 1 cable gland
- 5 thread sizes for M12・M16・M20・M25・M32
- Cable range : φ1.5mm~φ11mm
- NEW PRODUCT

- STRAIN RELIEF CABLE GLAND - RSP series
- Strain relief cable gland for protecting cables.
- Protecting class : IP67
- 6 sizes for M8・M10・M12・M16・M20・M25 in light gray / black
- Cable range : φ1mm~φ16mm
- NEW SIZE

- LOW-COST VENTILATION PLUG - CVP series
- Economical IP68 ventilation plug
- Protects enclosures from deformation by
- equalizing in/out side pressure
- Available in M6, M12, M16, and M24 sizes
- NEW PRODUCT

- LOW-COST METAL VENTILATION PLUG - CVP-M series
- Economical IP68 Metal ventilation plug
- Protects enclosures from deformation by
- equalizing in/out side pressure
- Available in M6, M12 and M20 sizes
- NEW PRODUCT

- GORETEX PROTECTIVE VENT - PMF series
- Screw in protective vent plugs.
- Built-in membrane filter plugs with IP68 waterproof and airflow.
- Equalize pressure and reduce condensation.
- M6, M12, and M32 models are available.

- ADHESIVE PROTECTIVE VENT FILTER - VE8 series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.6, φ14 and φ21.5mm are available.
- NEW PRODUCT

- ADHESIVE PROTECTIVE VENT FILTER - VSC series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.5, φ13 and φ24mm are available.

- VENTILATION LOUVER - V series
- Ventilation louver for outdoor enclosure.
- Effective for preventing condensation and heat dissipation.
- Can also be used for enclosures other than TAKACHI boxes.
- 2 different sizes in 2 colors are available.

- VENTILATION - VF series
- Hooded ventilation parts.
- Effective for preventing condensation and heat dissipation.
- 2 sizes are available.

- HINGED INSPECTION WINDOW - IW series
- IP64/54 water resistant see-through hinged inspection window
- Smartly designed window for protection of switches and
- displays, etc. Knurled thumb screws for easy securing.
- 10 different sizes available.
- NEW PRODUCT

- DIN RAIL - FDR series
- 35mm aluminium DIN rail.
- For installation of terminal blocks, circuit breakers, or devices.
- Available in 53 different lengths.

- DIN-RAIL TERMINAL BLOCK END STOPPER - TKR series
- Stopper bracket for use with 35mm DIN-rail.
- Can be used to fix terminal blocks or modules.
- TKR-TWE1 for smaller attachment parts.
- TKR35-1 for larger / higher attachment parts.
- NEW TYPE

- ECONOMICAL DIN-RAIL END STOPPER - DRS series
- Economically priced end stopper bracket.
- Can be used to fix terminal blocks or modules.
- Included screws allow affixing of stopper brackets firmly
- at a fixed location.
- NEW PRODUCT

- DIN-RAIL MOUNTING BASE - DRA series
- DIN rail mounting base for 35mm DIN-rail.
- Simple installation and removal via the pull lever.
- Max load : 5kg.
- 3 different sizes available.

- LOW COST DIN-RAIL MOUNTING PLATE - DRT series
- Low cost DIN rail mounting plate for 35mm DIN rail.
- Simple installation and removal by tilting action.
- Max load : 1 kg
- Material : PBT UL94V-0

- IP68 SEAMLESS CABLE GLAND - THA45 series
- Seamless construction of connector and sealing insert
- for superb waterproof performance.
- NEW PRODUCT